LAB/HP are adjustable 19″ power sources in the power range from 3kW to 1.4MW in a compact design of up to 30kW in only 3U. ET-system as developer and manufacturer can realize your individual wishes next to our standard device.

Features:

The LAB/HP series has the following features, further features can be found in detail in the datasheet

1. Generation of any voltage and current curves via USB stick or digital interface (sequential control)
2. Data log function: Current operating values are stored on a USB stick at an adjustable interval.
3. Available digital interfaces IEEE488, RS485, RS232, LAN and USB
4. ATI 5/10 analog interface galvanically isolated: 0V to 5V or 0V to 10V (user selectable) and soft interlock
5. Adjustable filter function for the analog interface
6. Available modes: UI, UIR, UIP and PVSim
7. Adjustable voltage and current rise time (U- and I-Slope)
8. Umax and Imax adjustable by the user to limit output voltage or current
9. Adjustable switch-off time for the device after pressing the start button
10. Storable U / I output characteristic (e.g. for PVsim, shading) on USB stick
11. “High Speed” rise and fall time of the DC output voltage is reduced by a factor of 10 on average compared to standard times
12. Modular design for increased performance: Master-Slave operation up to 504kW
13. Temperature controlled fan
14. Display via TFT touch display (values, status display and mode selection)
15. Via function USB stick Function generator with different curves
16. auto ranging function
17. Controllable via WLAN
18. Support SCPI command language
19. Protective functions: OVP, OCP, UVP (adjustable time)
20. LabView driver available
21. Control software for Windows
22. External sense outputs
23. Fast crossover between CV & CC
24. Modifiable according to customer requirements, outputs up to 1.4MW possible